Wiegand 26 Access Control 12VDC Metal Touch Keypad IP68 Waterproof For ID Cards

Description:

• The unit is single door multifunction standalone access controller or a Wiegand output keypad card reader. It is suitable for mounting either indoor or outdoor in harsh environments.

Features:

• Waterproof, conforms to IP68
• Strong Zinc Alloy Electroplated anti-vandal case
• Full programming from the keypad
• 2000 users, supports Card, PIN, Card+PIN
• Can be used as a standalone keypad
• Backlight keys
• Wiegand 26 input for connection to external reader
• Wiegand 26 output for coonection to a controller
• Adjustable Door Output time, Alarm time, Door Open time
• Very low power consumption (30mA)
• Fast operating speed, <20ms with 2000 users
• Lock output current short circuit protection
• Easy to install and program
• Built in light dependent resistor (LDR) for anti tamper
• Built in buzzer
• Red, Yellow and Green LEDs display the working status

Specifications:

• Operating Voltage: 12VDC
• User Capacity: 2000
• Card Reading Distance: 3-6cm
• Frequency: 125KHZ
• Active Current: <60mA
• Idle Current: 25±5mA
• Lock Output Load: Max 3A
• Alarm Output Load: Max 20A
• Operating Temperature: -45°C~60°C
• Operating Humidity: 10%~90% RH
• Waterproof: Conforms to IP68
• Adjustable Door Relay Time: 0-99 seconds
• Adjustable Alarm Time: 0-3 minutes
• Wiegand Interface: Wiegand 26 bit
• Wiring Connections: Electric Lock, Exit Button, External Alarm
• Product Size: 155*45*20mm
• Package weight: 330g

Installation:

• Remove the back cover from the keypad using the supplied special screw driver
• Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable
• Put the supplied rubber bungs into the 2 holes
• Fix the back cover firmly on the wall with 2 Self tapping screws
• Thread the cable through the cable hole
• Attach the keypad to the back cover

Package includes:

• 1 x Access Control Keypad
• 1 x Installation Kit
• 1 x User Manual