PD-132 single Vehicle loop detector for Door Access Control

Features

1) Reset Switch : The reset switch enables the detector to be manually reset
during registering and testing and it is a process of system recovery;

2) Selectable Pulse Time : This feature sets the length of time that
the pulse relay will be lasting for 1 Second or 0.5 Seconds ;

3) Pulse Relay Selection : The Pulse Relay may be configured
to activate on detection of a vehicle or when the vehicle leaves the loop;

4) Sensitivity Reinforcement : This feature sets the un-detecting level to
a maximum sensitivity to prevent failing to detect vehicles as big trucks;

5) Switch Sensibility Adjustable : 4 sensitivity setting are available
on the switches to change sensitivity ;

6) Switch Frequency Adjustable : 4 frequency settings are available
to prevent signal interference with neighboring loops ;

7) Filtering Option : This option is used to provide a delay
between detection of the vehicle and switching of the output relay .
This relay is normally used to prevent false detection
of small or fast moving objects ;

8) Permanent Presence Option : This feature ensures the detection
of the vehicle will be maintained when the vehicle stays within the loop area
for extended periods

Technical data

1. Supply voltage: AC110V or 220V

2. Voltage tolerance AC: +10% / -15%

3. Voltage tolerance DC: ±15%

4. Power Consumption: 4.5VA

5. Operating temperature: -20°C to +65°C

6. Storage temperature: -40°C to +85°C

7. Frequency range: 20 kHz to 170 kHz

8. Reaction time: 10ms

9. Signal lasting time: Unlimited /

limited when loop is permanently covered 10 minutes

10. Sensitivity: Adjustable

11. Loop inductance: Total loop plus connection wiring: 50μH to 1000μH;

Ideal is 100μH to 300μH

12. Loop connection wiring: Maximum length 20 meters,

twisted at least 20 times per meter

13. Dimension: 78x40x108 mm (L x W x H)

Package

Carton or Wooden;