Wireless GSM Home Alarm System SMS Autodial House Home Security
System Intruder Alarm Russian/English Voice PIR Detector Door Sensor
House GSM Alarm System app control For Home security System with
wireless PIR wired Door sensor Dual Antenna burglar alarm
Introduction
- This system has the features like strong GSM wireless signal,voice reminder,convenient operation,etc.This system can be insertd GSM SIM card.
- The host has 6 wireless defense zones and 4 wired defense zones,with each having 5 defense zone types to set:general defense zone,stay defense zone,smart defense zone,emergency defense zone,and close defense zone.
- Two groups of fixed arming and dis-arming,with each group can set weeks,to avoid manual selection and achieve full auto control.
- use phone(mobile phone)or SMS to remotely control host,and support Fetion control to reduce SMS cost.
- 6 voice alarming number and 3 SMS alarm receiving number.External AC dump will be sent to 3 alarming receiving number and dial 6 voice alarming number as per settings.
- 10 seconds custom SMS recording can be played on host.Also this can be inserted with artificial voice,thus users can know the place where the alert occurs and defense zone number when users remotely receive alarming.
- Distance monitor,propaganda functions and remote set or withdraw alarming by phone or SMSs.
- One group frequent signal output and relay ganged alarming output to achieve house appliances remote control.
- Wireless smart learning fittings make leaning match codes convenient.The host can support 2.262 and millions match code.Thus users can learn 50 remotes and 50 detectors.
- NI-HI rechargeable batteries are inserted.In the case of power off,it can automatically switch spare batteries are inserted.In case of power off,it can automatically switch spare battery and remind by SMSs.
- The host adopts new GSM/GPRS technical module of 2-band and 4-band to be applicable in different countries.
English/Russian/ voice for Choose
Parameters
Alarm Panel 
Input Voltage:DC9V-12V Standby current:<25mA Alarm Current:<450mA Wireless Frequency:315/433/868/915 MHz,2262/1.5-4.7M,EV1527/300K GSM:GSM 850/900/1800/1900MHz Backup battery:NI-HI AAA*6 DC7.2V Alarm volume:110dB This alarm apperatus is compatible with code PT2262,code PT2240 and code EV1527.Suggested oscillation resistance for ode PT2262 is 1.5M-4.7M;suggested oscillation resistance and date code for EV1527 are respectively 300K and 1010.
Wired Door Sensor(battery included)
Wireless PIR Motion Sensor 
Principle of infrared detectors is to sense people’s movement through detecting infrared signals generated by bodies and the detection range is usually 5-12 meters. Infrared sensor should be installed about 2.2 meters away from ground. Aim straight at the detection ranges.
1, Standby Current: less than 12uA 2, Alarm Current:less than 15mA 3, Operation Temp: -10C~50C;Humidity:no more than 90% 4, Installation Height: About 2M. Installation Angel:About 60~110 5, Detecting Distance: 5-8M 6, Transmissons Time no less than 1s 7, Wireless Freq:433MHz 8, Transmit Distantce:Outdoor 100M(no obsctale), Indoor:10~15M 9, Battery Life: 3 to 6 months and you can turn off the switch if you have no need to use it.
Wired Siren
1: Power: DC9V/500mA,average current of standby is less than 0.6mA 2: the wireless operating frequency: 433MHz 3: the use of the environment: stability: 0 -55 , Relative Humidity: 40% -70% 4: the alarm sound: greater than 100 db Packages:
GSM Alarm Panel* 1 (433MHz,We offer English/Russian voice.Please contact us the one you need,or we will ship the English voice.)
Wireless pir motion detector * 1
Wired door sensor * 5
Wired siren * 1
RC532 Wireless remote controller * 2
English user manual * 1
AC power adapter * 1(US/AU/UK/EU plug,according your country to ship)
