Free Shipping Fingerprint Lock for Safe Box Money Cash Safe Electronic Password Lock
User manual for the lock:
Product name: electronic fingerprint lock B867 (magnet) distribution
A, for the first time use:
Electricity (after) using 5 alkaline batteries, presses down to fingerprint readers, green light is blinking. System verification of fingerprints, hear “di di”, prompt, show “good” at the same time, the verification through, electromagnet suction in 5 seconds.
Second, the fingerprint registration:
1, the registration first fingerprints
First press the green button (fingerprint add key), “di”, then the fingerprint readers green light began to shine. At this point in the collector position long press fingerprint. Hear “di” a long sound, according to the “GOOD” fingerprint added successfully, display “ERR” is not successful.
2, the registration of other fingerprint
1) press the green button first ADD keys) (fingerprint, “di”, screen display “ADD” then fingerprint readers green light began to shine.
2) validation registered fingerprints, hear “di, di”, (authorization) success, such as three consecutive authorization is not successful, the system will automatically quit, shut off the power.
3) in the acquisition window on new fingerprint, hear “di” a long sound, according to the “GOOD”, fingerprint add success (registration).
Note: this fingerprint lock can store up to 100 fingerprints.
Three, the fingerprint lock:
1, presses down to the fingerprint readers, green light is blinking, the screen shows “PUT”, the system begins to verify the fingerprint.
2, if verification is successful, will hear “di di”, prompt, electromagnet suction, screen display “” OPEN”.
3, if verification is not successful, can hear “di di, di” shortness of three short, fingerprint lamp display “ERR”.
Four, modify the password:
1, with a password or fingerprint lock (the default password is 1234)
2, during the electromagnet and the screen shows “OPEN”, press “*” key, the screen into a state “, “change the password.
3, 1-8 input password, press “#” key to confirm
Five, password lock:
1 to 8, input password, press “#” key to confirm
2, if the password is correct, may be to hear “di di”, prompt, electromagnet suction, screen display “OPEN”.
3, if the wrong password, can hear “di di, di” shortness of three short, screen display “ERR”.
Six, delete all fingerprints
Hold down the red button (fingerprint delete key) for 3 seconds (note: to hold down, don’t let go. Hear “di” of a long sound, the screen shows “REST” delete all fingerprints, fingerprint lock has returned to the factory Settings, any fingerprints can be unlocked.
Seven, under-voltage tip and the use of emergency power supply
After the lock as a “di di, di” three long notes, screen display “BATL” please replace new battery. If the battery is low, unable to unlock, can use emergency power lock, use the steps:
1) the battery into the emergency battery box, inserted into the external pins on the joint of the battery compartment (the power converter socket is located in the lower right panel).
2) the normal input fingerprint lock.
3) immediately after the lock to replace the built-in battery.
Eight, alarm function
1, the sleep state, press “#” key, hear “di”, screen display “ALON,” open alarm function.
2, when the body trembled, system will alarm horn ring for one minute, or the password input fingerprint verification after the lock, to stop the alarm.
3, after the lock alarm function to shut down, if you want to use alarm functions, please open it again.
Nine, common problems and solutions
1, a fingerprint can’t add how be to return a responsibility?
A: can be the following reasons:
1) fingerprint groove too shallow (no obvious fingerprints or fingerprint has been smooth), not easy to get feature points.
2) fingerprint is too dense (finger is too small, such as children under the age of 9 or individual girls), image resolution is not enough.
3) finger feature points is too little, the system is difficult to confirm the finger, please register in the other fingers.
4) fingers too dry (can’t in like the window to form effective gel image), pinch the two finger rub can be improved.
2, why registered fingerprints sometimes can’t open the door?
Answer: may have caused the following conditions:
1) can be different and add according to the position of the finger, please click add way according to the mean.
2) may be too dry or too wet finger, please wipe your fingers.
3) may be his fingers too light, please try again a little bit hard.
4) finger feature points is too little, the system is difficult to confirm the finger, please register in the other fingers.
3, how to press the fingerprint correctly?
Answer: in the face of the front of the lock, with fingers on the surface of the surface along the acquisition Angle, at the center of the pattern of the finger pressure on the collection center with proper strength.
