Free shipping 1/3″ SONY SUPER CCD 700TVL Mini bullet Camera Security Small Mini CCTV Camera Video Surveillance 2.8mm WIDE ANGLE
start
end
end
Features:
mage Sensor: 1/3″ Sony Super HAD CCD II
DSP: Effio-E (4140+811/810)
Horizontal Resolution :700TVL
Effective Pixel:NTSC:976(H) X494(V) PAL:976(H) X582(V)
Min. Illumination :0.001 Lux (F1.2)/ 0 Lux IR On
Signal System: NTSC/PAL
Lens: Standard 2.8mm
Camera Type: Indoor/Outdoor
Power Supply: DC12V/75MA
2*7.6CM
Specification Of the Camera:
|
Model
|
RX700BT
|
|
Image Sensor
|
1/3″ Sony Super HAD CCD II
|
|
DSP
|
Effio-E (4140+811/810)
|
|
Horizontal Resolution
|
Color Mode: 650TVL; B/W Mode:700TVL
|
|
Effective Pixel
|
NTSC:976(H) 494(V) PAL:976(H) 582(V)
|
|
Min. Illumination
|
0.001 Lux (F1.2)/ 0 Lux IR On
|
|
Signal System
|
NTSC/PAL
|
|
Electronic Shutter
|
NTSC:1/60~1/100,000, PAL:1/50~1/110,000
|
|
S/N Ratio
|
More than 48dB
|
|
Gamma
|
0.45/1.0
|
|
Exposure
|
Auto
|
|
OSD
|
Support
|
|
White Balance
|
ATW / User1/User2
|
|
Backlight
|
OFF/ON/BLC/ HLC
|
|
Pic Adjust
|
Mirror/Brightness/Contrast/Sharpness/Hue/Gain
|
|
ATR
|
ON/OFF
|
|
D-WDR
|
Yes
|
|
Motion Det
|
OFF/ON(Detect sense/ Area Sel)
|
|
Privacy Masking
|
OFF/ON (4 Zone)
|
|
Day/Nigh
|
True Day and Night (Auto/ Day / Night / Ext. D&N)
|
|
2D-NR
|
OFF/ON (0-15/16 level)
|
|
Camera ID
|
OFF/ON
|
|
Sync. System
|
Internal
|
|
Audio Output
|
Optional
|
|
Video Output
|
1 Vp-p / 75 Ohms
|
|
Working Conditions
|
-20~60Degree/0-93% Humidity
|
|
Power Supply
|
DC12V/75MA
|
Note: 2.8mm lens, PAL SYSTEM,Black housing color default for this camera. If the buyer want other size lens,other system, please Leave Message to notify us when bidding.
Trouble and Solution:
1. No Picture after providing power
May be the power supply voltage abnormity, please check the power supply voltage and pole whether exactitude.
Please check all the conecting cable and monitors whether be connected correctly or not.
2. The picture level direction have flowing interference ripples
May be caused by the power supply AC ripples, it need filter the wave of the power supply.
Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
The fluorescent lamp\’s electromagnetic field cause color roll. This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can
improve it.
Use Power supply external sync. Camera can solve it.
4.The picture smear too mass
The power supply\’s voltage unstable
Connecting cables not connect correctly or have high impedance.
Trouble and Solution: PS: PAL format is for Euro Courty, NTSC format is for USA, Canada, if you don\’t know which one you need, please feel free to contact us.
1. No Picture after providing power
May be the power supply voltage abnormity, please check the power supply voltage and pole whether exactitude.
Please check all the conecting cable and monitors whether be connected correctly or not.
2. The picture level direction have flowing interference ripples
May be caused by the power supply AC ripples, it need filter the wave of the power supply.
Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
The fluorescent lamp\’s electromagnetic field cause color roll. This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can
improve it.
Use Power supply external sync. Camera can solve it.
4.The picture smear too mass
The power supply\’s voltage unstable
Connecting cables not connect correctly or have high impedance.
