EM ID 125khz Slim Waterproof IP68 Zinc Alloy Standalone Keypad Access Control

Description:

• The unit is single door multifuncion standalone access controller or a wiegand output keypad or card reader.
• It is suitable for mounting either indoor or outdoor in harsh environments.

Features:

• Waterproof, conforms to IP68
• Strong Zinc Alloy Electroplated anti-vandal case
• Full programming from the keypad
• 2000 users, supports Card, PIN, Card+PIN
• Can be used as a stand alone keypad
• Backlight keys
• Wiegand 26 output for connection to a controller, wiegand 26 input for connection to external reader
• Adjustable Door Output time, Alarm time, Door Open time
• Very low power consumption (30mA)
• Fast operating speed, <20ms with 2000 users
• Lock output current short circuit protection
• Easy to install and program
• Built in light dependent resistor(LDR) for anti tamper
• Built in buzzer
• Red, Yellow and Green LEDS display the working status

Specifications:

• Operating Voltage: 12VDC
• User Capacity: 2000
• Card Reading Distance: 3-6cm
• Active current: <60mA
• Idle current 25±5mA
• Frequency: 125KHZ
• Lock output load: Max 3A
• Alarm output load: Max 20A
• Operating temperature: -45~60
• Operating Humidity: 10%-90%RH
• Waterproof: conforms to IP68
• Adjustable door relay time 0-99seconds
• Adjustable alarm time: 0-3 minutes
• Wiegand interface: Wiegand 26 bit
• Product size: 150*43*25mm
• Package weight: 500g

Installation:

• Remove the back cover from the keypad using the supplied screw driver
• Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
• Put the supplied rubber bungs to into the two holes
• Fix the back cover firmly on the wall with 2 Self tapping screws
• Thread the cable through the cable hole
• Attach the keypad to the back cover

Package includes:

• 1 x Metal Access Control
• 1 x Installation Kit
• 1 x User Manual